Our Channel Seal (CS) HEPA Ceiling Module is an ideal terminal HEPA filter module for pharmaceutical and biotechnology facilities, or for any other facility that requires clean-room level air filtration.The CS HEPA Ceiling Module has been designed to ensure HEPA filters can be tested and replaced without disturbing the HEPA filter housing.
Galvanised housing that s powder-coated and white on the inside
304SS fully-welded HEPA filter retaining assembly
Airflow distribution plate located on inlet to dispose air uniformly across HEPA filter
The gel-seal design offers superior protection against bypass leakage
304SS perforated screens
The 40mm Turned-up edge provides superior sealing against varying ceiling types
It includes a static pressure port for evaluating HEPA filter pressure drops and for sampling the upstream aerosol concentration during filter scanning testing
Nominal 50mm deep AirePanel CS Mini-Pleat HEPA Filter H14 to EN1822:2009
Fully welded construction in either galvanised, 304 or 316 stainless steel
Fully powder-coated finish
Adjustable butterfly damper
Roomside aerosol injection port
100mm Deep AirePanel CS Mini-Pleat HEPA Filter H14 to EN1822:2009 (lower initial pressure drop)
Nominal 50mm and 100mm AirePanel CS Mini-Pleat ULPA filters H14 to EN1822:2009
Airepure AirePanel CS Mini-Pleat filters used in the CS HEPA modules utilise gel seal technology. Instead of a gasket, the filter has a perimeter channel filled with Ãseal, a self-adhesive, self-healing silicone compound. When the filter is raised into position, a knife edge flange in the module penetrates into the gel channel, thereby creating a leak-tight interface. Four simple retainers located on the corners of the module are then turned 90° degrees to hold the filter in place, thereby guarantying a uniform and permanent seal between filter and housing. Gel seal technology eliminates the bypass problems usually associated with gasket seal applications. Gel seal filters provide a superior leak free protection critical for cleanroom installations.